APC Smart-UPS RT 20kVA – SURT20KRMXLI
APC Smart-UPS RT 20kVA, 230/400V, LCD, rackmount, 12U, 2x IEC Jumpers & 8x IEC 60320 C19 outlets
Features
– Rack/Tower convertible – Rack-mount and tower installation options enable flexible setup.
– Extended runtime external battery options – Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.
Manageability
– Serial connectivity – Provides management of the UPS via a serial port.
– SmartSlot and/or Embedded NMC – Customize UPS capabilities with management cards.
– EcoStruxure Ready – Provides remote UPS monitoring and management options.
– LED status indicators and audible alarms – Quickly understand unit and power status with visual and audible indicators.
Availability
– Automatic internal bypass – Supplies utility power to the connected loads in the event of a UPS power overload or fault.
– Automatic restart of loads after UPS shutdown – Automatically starts up the connected equipment upon the return of utility power.
– Live-swap capable – Add or swap batteries without interrupting the UPS load.
– Intelligent battery management – Maximizes battery performance, life, and reliability through intelligent, precision charging.
Protection
– Frequency and voltage regulation – Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
– Safety-agency approved – Ensures the product has been tested and approved to work with the connected service provider equipment and within the specified environment.
– Resettable circuit breaker – Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)
– Cold-start capable – Provides temporary battery power when the utility power is out.
Specifications APC Smart-UPS RT 20kVA – (SURT20KRMXLI)
Overview
– Presentation: High density, double-conversion on-line power protection with scalable runtime.
– Lead time: Usually in Stock
Main
– Run time for load 16000 W Min-max: 1600-16000 W 4min 53s
– Max. Capacity Used: 100 %
– Main Input Voltage: 230 V, 400 V 3 phases
– Product or component type: Uninterruptible power supply (UPS)
– Other Input Voltage: 220 V, 240 V
– Main Output Voltage: 230 V
– Other Output Voltage: 220 V, 240 V
– Rated power in W: 16000 W
– Rated power in VA: 20000 VA
– output connection type: 2 IEC Jumpers, 8 IEC 60320 C19
– Output connector type: Hard wire 3-wire (H N + E) 1, Hard wire 5-wire (3P + N + E) 1
– Number of rack unit: 12U
– battery type: Lead-acid battery
– Provided equipment:
>CD with software
>Rack mounting support rails
>Smart UPS signalling RS-232 cable
>User manual
>Web/SNMP management card
Batteries & Runtime
– Run Time: View Runtime Graph
– Efficiency: View Efficiency Graph
– Number of battery filled slots: 4
– Number of battery free slots: 0
– Battery recharge time: 2.5 h
– Number of battery replacement quantity: 4
– Additional information: Configurable for 400 or 415 V 3 Phase nominal output voltage
– battery voltage: +/- 192 V (split battery referenced to neutral)
– Discharge battery voltage: +/- 154 V
– Battery charger power: 1530 W rated
– Battery power in VAH: 3840 VAh runtime
– Battery life: 3…5 year(s)
– Replacement battery: APCRBC140
– Battery option:
>SURT192RMXLBP2 1 7680 VAh
>SURT192RMXLBP2 2 11520 VAh
>SURT192RMXLBP2 3 15360 VAh
>SURT192RMXLBP2 4 19200 VAh
>SURT192RMXLBP2 5 23040 VAh
>SURT192RMXLBP2 6 26880 VAh
>SURT192RMXLBP2 8 34560 VAh
>SURT192RMXLBP2 9 38400 VAh
– Extended runtime: 1
General
– Number of power module free slots: 0
– Number of power module filled slots: 0
– Redundant: No
Physical
– Colour: Black
– Height: 53.3 cm
– Width: 43.2 cm
– Depth: 77.3 cm
– Net weight: 247.73 kg
– Mounting location: Front
– Mounting preference: Lower
– Mounting mode: Rack-mounted
– Two post mountable: 0
– USB compatible: No
Input
– Network frequency: 40…70 Hz auto-sensing
– Number of input connectors: 1 hard wire 3-wire (1P + N + E), 1 hard wire 5-wire (3P + N + E)
– Input voltage limits: 160…280 V
– Maximum input current: 115 A
– Switching current capacity: 125 A
– Input harmonic distortion: Less than 5 % for full load
– Input current: 115 A (1 phase), 38.3 A per phase (3 phases)
– Input Power Factor at Full Load: 0.98
Output
– Maximum configurable power in W: 16000 W
– Harmonic distortion: Less than 5 %
– Output frequency: 50/60 Hz +/- 3 Hz user adjustable +/- 0.1 Hz sync to mains
– Crest factor: 3 : 1
– UPS type: Double conversion online
– Wave type: Sine wave
– Output overload operation: 60 seconds at 125% and 30 seconds at 150%
– bypass type: Built-in static bypass
– Internal bypass (automatic and manual): Optional external bypass
– Efficiency: 93 % (in battery operation)
– Maximum configurable power in VA: 20000 VA
Conformance
– Product certifications: BSMI, VDE
– Standards
> EN/IEC 62040-1:2019/A11:2021
> EN/IEC 62040-2:2006/AC:2006
> EN/IEC 62040-2:2018
Environmental
– Ambient air temperature for operation: 0…40 °C
– Relative humidity: 0…95 % non-condensing
– Operating altitude: 0…10000 ft
– Ambient air temperature for storage: -15…45 °C
– Storage Relative Humidity: 0…95 % non-condensing
– Storage altitude: 0.00…15240.00 m
– Acoustic level: 59 dBA
– Heat dissipation: 3770 Btu/h
– IP degree of protection: IP20
Communications & Management
– Free slots: 0
– Preinstalled device: Network management card 2 with environmental monitoring
– Emergency power off: Yes
Surge Protection and Filtering
– Noise suppression: Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449
Packing Units
– Unit Type of Package 1: PCE
– Number of Units in Package 1: 1
– Package 1 Height: 99 cm
– Package 1 Width: 61 cm
– Package 1 Length: 100.3 cm
– Package 1 Weight: 314.09 kg
– Unit Type of Package 2: PAL
– Number of Units in Package 2: 2
– Package 2 Height: 111 cm
– Package 2 Width: 100 cm
– Package 2 Length: 120 cm
– Package 2 Weight: 626.864 kg
Contractual warranty
– Warranty: 2 years repair or replace